410 Mopar Engine 450 Horsepower
460 LBS of Torque
Click on image for larger view
Shown with Optional Serpentine System
TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!
- 360 Chrysler Block With Torque Plate Honed Cylinder Bores, Square Decked Block And Align Honed Main Housings
- Scat 9000 Crankshaft
- Forged Pistons
- Moly Rings
- Scat 4340 Connecting Rods
- Clevite 77 Bearings
- Hydraulic Camshaft, Duration @ 050, 224/230, Lift 477/480
- Hydraulic Lifters
- Comp Cams Ultra Pro Magnum Rockers
- Edelbrock Performer Rpm Aluminum Cylinder Heads # 60779
- Edelbrock Air Gap Intake Manifold # 7576
- Quick Fuel 750 CFM Carburetor
- Oil Pan And Pick Up
- Mopar Cast Aluminum Valve Covers
- MSD Distributor
- Spark Plugs And Wires
- Chromally Push Rods
- Water And Fuel Pump
- Braided Fuel Lines Add $210.00
- Engine Is Completely Assembled And Live Run Tested
$12,150.00 Plus options you Might choose Below
Options:
Packaged And Crated No charge.
No Core charge, Sold Outright
Additional Cost of Options Below
Add Alternator System Additional $990.00
Add Alternator and A/C Additional $2,180.00
Add Alternator and P/S Additional $1,970.00
Add Alternator P/S and A/C Additional $2,540.00
Add Holley Sniper II Electronic Fuel Injection Additional $2,350.00
Add Standard Balanced Flywheel Additional $325.00
High Torque Starter Additional $240.00
Bruce Direct 908-323-5847
If you would like to get started, you can submit a payment(s) here Pay Engine Factory it is our safe and Secure Payment Merchant Account; it only takes a couple of minutes, you can do it anytime at your convenience, you will get an instant receipt.
Regards,
Bruce Nelson President.