|
454 / 450 Horsepower
@ 5,250 RPM
515 LBS of Torque @ 3,250 RPM
Replaces any Big Block Chevy Engine
TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!
OPTIONS
High Torque Starter $225.00
Serpentine Belt System for your Alternator, Power Steering & A/C
Chevy Valve Cover, Air Cleaner, Belt Systems, and Color Choices
Packaged And Crated No charge.
No Core charge, Sold Outright
Packaged And Crated No charge.
No Core charge, Sold Outright
Additional cost of Options Below
Alternator system Add $990.00
Alternator and AC add $2,180.00
Alternator and PS add $1,970.00
Alternator PS and AC add $ 3,250.00
Custom Aluminum Valve covers & Air Cleaner Add $620.00
Holley Sniper electronic Fuel injection add $1,975.00
Standard Balanced Flywheel add $325.00
High torque starter add $240.00
|
- Gen VI 4 Bolt Main Engine
- 9.6 To 1 Compression
- Forged Steel Crankshaft
- New Steel Beam Connecting Rods
- Power Forged Pistons
- Speed Pro Chrome Moly Rings
- Heavy Duty Double Roller True Roller Timing Set
- Aluminum Fast Burn Edelbrock Oval Port Heads W/ 110cc Combustion Chambers
- 2.19/1.88 Stainless Steel Valves, Hardened Valve Locks, Chrome Moly Retainers, Heavy Duty Valve Springs And Screw In Studs
- Custom Hyd. Roller Camshaft Duration @ 050 211/230, Lift 510/540
- Hardened Seats For Running Unleaded Fuel
- Hydraulic Roller Lifters
- Federal Mogul Tri-Metal Bearings
- Black Oxide Coated Pushrods
- New 1.7 Ratio Rocker Arms
- Melling High Volume Oil Pump
- Complete Fel-Pro Gasket Set
- New Gm Harmonic Balancer
- New Flexplate For Automatic Trans. (Standard Flywheel Extra $ 250.00 )
- New Oil Pan, Timing Cover And Baffled Valve Covers
- Edelbrock Dual Plane Port Matched Intake Manifold # 7164
- Quick Fuel 750 Cfm Carburetor
- New High Flow Water Pump
- New Fuel Pump
- Race Prepped High Energy Ignition Distributor W/ 53,000 Volt Coil Pak
- New Champion Spark Plugs Gapped And Installed
- 8mm High Temp Resistant Silicone Wires
- New Chrome Thermostat Housing
- 14 Inch Chrome Air Cleaner
- Pcv And Breather Installed
- New Fuel Lines And Gas Filter
- Oil Filter, Dipstick And Diptube
- Ignition Timing Set, Carburetor Fully Adjusted
- Hot Run Tested And Dialed In Place
- Free 40 Minute Installation Dvd
- Painted With A High Temperature Enamel Paint
- Packaged And Crated For Shipment
$14,295.00
|
