Free shipping all USA 48 States Month of March
Check out our customer testimonials
Building Chevy, Ford, and Mopar Muscle engines since 1969
American Made quality parts, Assembled By ASE Certified Builders
Chevy 434/550 Horsepower.
Dart 4 bolt main block with Forged Pistons, Forged Crank, Forged Rods, Roller Cam, Roller rocker arms, arrives ready to run!!!
When you have been building engines for as long as we have there isn't a day that goes by that we don't have a customer call and say they want to put some American Muscle into one of their European cars. Here is one that we recently built for an MGB GT it is a 331 Ford Custom Stroker
Chevy 383/475 HP with Dual Quad Carbs and AFR Cylinder Heads engine arrives ready to run right out of the box.
We set it up with Progressive throttle linkage for instant throttle response.
Ford 363 500 HP ready to run engine. This a Great 363 Ford Dart 4 bolt main block with Forged Pistons, Forged Crank, Forged Rods, Roller Cam, Roller rocker arms, We build this engine with Aluminum Cylinder Heads, Quick fuel Carburetor. It arrives ready to run it only requires 3 wires to start and run.
Ford 390 FE 450 HP with aluminum Heads. This engine arrives ready to run right out of the box. These engine are very difficult to find we currently have two in the early stages of the build if you need one now is the time to order. The engine above is shown with optional Serpentine Belt system.
Cobra 427/538HP with Cobra Valve Covers, and Cobra Air Cleaner. This Roller cam engine with Aluminum Heads, and intake. We can set it up with Quick fuel Carb or Sniper Fuel injection. Shown with optional Belt system with 100 Amp Alternator, PS pump, and AC compressor.
Ford 351 Windsor 400 HP This Roller cam engine arrives ready to run right out of the box. You have a choice of custom valve covers, wire color, and air cleaner.
Ford 400M/375 HP with MSD Fuel Injection, shown with optional Serpentine Belt system.
Chevy 350/400 HP Roller Cam 4 Bolt Main ready to run, shown with optional Serpentine Belt system.
Chevy 350/430 HP Roller Cam 4 Bolt main, with optional custom paint, braided fuel lines, starter, and headers as shown
Chevy 383/450 HP Stroker engine with 4 Bolt main brand new block, Roller Cam Black theme, and Starter.
Ford 408/475 HP Stroker Engine arrives Ready to run. Built with Mahle Forged Pistons, Roller Cam, Edelbrock Heads and Intake, Quick Fuel Carburetor, shown with optional Serpentine Belt system.
Ford 427 FE Lemans series Full dress, shown with optional Serpentine Belt system.
Chevy 350/375 HP ready to run engine, 4 Bolt main Roller Cam, Starter, blacked out alternator system, shown with optional Serpentine Belt system.
Chevy 509/600 HP Ready to run with New Dart block, Roller Cam, Braided fuel lines, shown with optional Serpentine Belt system.
Chevy 350/430HP Ready to run roller Cam, Custom Paint, Braided fuel lines, starter, Alternator, PS, Headers. Serpentine system and headers are Optional.
Ford 347/425 HP ready to run Roller Cam, Cobra Valve Covers, Cobra Air Cleaner, shown with optional Serpentine Belt system.
Chevy 434/550 HP ready to run engine, New Dart Block, starter, Braided fuel lines, shown with optional Serpentine Belt system.
Ford 351/400 HP Windsor ready to run engine with Cog Belt system. Serpentine system is Optional
Chevy 502/510 HP Ready to run with all new GM 4 Bolt main Block Roller Cam, Braided lines, shown with optional Serpentine Belt system.
Ford 460/450HP Big block Ready to run with Aluminum heads Braided fuel lines, Alternator, PS, and AC. Serpentine system is Optional.
Ford 302/350 - Check out this 302/350 Horsepower engine going to Mexico. It is for a repeat customer going into a 1965 Mustang.
Ford 302/350 HP ready to run engine, with Cobra Valve covers, Cobra air cleaner, Alternator, PS, and AC. Serpentine system is Optional
Mopar 440/475 HP ready to run, shown with optional Serpentine Belt system.
Mopar 360 ready to run, shown with optional Serpentine Belt system
455 Oldsmobile custom built ready to run engine.
Chevy 434/550 HP will replace any Chevy Small block without Modifications, ready to run, all Forged internals, only requires 3 wires to start and run perfectly. Dart Block and Heads, shown with optional Serpentine Belt system.
Ram Clutch Disc, Pressure Plate, Throwout Bearing, and alignment tool. Cash and Carry $379.00
Complete Clutch Assembly, Flywheel, Bellhousing, Fork, Throwout Bearing, and TKO 600 Trans. Cash and carry $4,567.00
Chevy black powder coated Intake. Early style 12 bolts hold it onto heads Cash and Carry $349.98
Complete engine Rebuild kit as shown. Cash and Carry $4,672.50
MSD Electronic fuel injection Cash and Carry or we install.
7 Disc DVD instructional videos now available.
If your assembling your own engine or just adding a set of heads you will be able to play the video on your laptop as we walk you through all the little items that you should be doing so that your job turns out to be a dream not a nightmare. Videos are clearly labeled and also make a great gift. we take you from the oil pan to the air cleaner so that you can have the satisfaction of doing the job right the first time. $110.00 this could save you thousands of dollars on repairs.
Ford 302 Quality Remanufactured Cylinder Heads with all New Valves, Includes FelPro Gasket set. Casting # E7TE 87-95 Fit Cars or Trucks with Roller Cam and bolt down rockers. Also available are roller lifters, pushrods, and rocker arm assemblies at wholesale prices. In stock ready to ship. $349.00
The engine shown above is our Nostalgia series.
Of course we can build it with any Valve cover and air cleaner along with the colors you choose. Engine shown has Optional belt system.
Engine shown above is our 350/430 Horsepower ready to run engine, it only requires 3 wires to get it up and running perfectly.
It will replace any small block Chevy without Modifications. Engine is shown with Optional serpentine belt system.