427W / 538 Horsepower
Over 500 lbs. of Torque!!!
“hold on to your seat”
Click here to see 427 details
Click on image for larger view Shown with optional serpentine system
TURN KEY ENGINE.
ARRIVES READY TO RUN RIGHT OUT OF THE BOX!!
$17,765.00 Plus option Choices below.
Packaged And Crated No charge.
No Core charge, Sold Outright
Additional cost of Options Below
Alternator system Add $990.00
Alternator and AC add $2,180.00
Alternator and PS add $1,970.00
Alternator PS and AC add $ 2,540.00
Holley Sniper electronic Fuel injection add $2,350.00
Standard Balanced Flywheel add $325.00
High torque starter add $240.00
Request Quote |
- New 4 Bolt Main Block 4.125 Bore
- Ford Stroker Steel Crankshaft 4.00 Stroke
- New H-Beam Connecting Rods with 190,000 PSI ARP Bolts
- Power Forged Mahle 10.3 To 1 Compression Flat Top Pistons
- Chrome Moly Rings
- 3 Piece Timing Set
- New Hydraulic Roller Camshaft
- Clevite H Series Bearings
- Engine Factory Series Aluminum Performance Heads
- 180 CC Intake Runners, 60 CC Combustion Chambers
- New 2.02″ Intake Valves.
- New 1.60″ Exhaust Valves.
- 3 Compression ratio, Pump gas 93 Octane
- Hi Rev Valve Springs, up to 575 Cam lift
- Comp Chrome Moly Pushrods
- 6 Roller Rockers
- New Melling High Volume Oil Pump And Screen
- Complete Fel-Pro Performance Gasket Set
- New Harmonic Balancer Sfi Approved
- New Automatic Flexplate
- (Standard Transmission Steel Billet Flywheel Sfi Approved Additional $350.00)
- New Oil Pan And Aluminum Timing Cover
- Polished Aluminum Baffled Valve Covers
- Weiand Intake
- Quick Fuel 750 CFM Carburetor
- New High Flow Aluminum Water Pump
- New High Volume Fuel Pump
- Electronic Ignition Distributor, With MSD 45,000 Volt Coil
- New Champion Spark Plugs Gapped And Installed
- 8mm Accel Silicone Wires & Looms
- New Thermostat Housing & Thermostat
- 14″ Air Cleaner
- PCV Ventilation System
- New Fuel Lines And Gas Filter
- Ignition Timing Set, Carburetor Fully Adjusted
- Hot Run Tested And Dialed In Place
|
Shown with optional serpentine system